Standard Camera

AKS

 

Accessories

 

ARRI WCU-4 Wireless Follow Focus

WCU-4 Wireless Compact Hand Unit

Cforce Plus Lens Motor

Cforce Mini Lens Motor

8" LBUS Motor Cables (x2)

12" LBUS Motor Cables (x2)

Sony NP-FM500H Batteries (x3)

Charger for Sony Batteries

Arri Hand and Neck Strap

Unmarked Focus Ring

Pre-Marked Focus Ring 8", 12", 14", 20", 3'6

SD Card

Custom Carry Case


 

 
Citizen Cine FF-5 Follow Focus.png

ARRI FF-5 Follow Focus

FF5-Cine Follow Focus base

Standard Focus Knob (left side)

35 tooth, 0.8 Metric Module Gear

43 tooth, 0.8 Metric Module Gear

Standard Focus Knob (Right Side )

Focus Lever (speed handle)

Flexible Shaft Short (300mm)

Marking Disk, Flat (x7)

 

 
LMB-4x5_mpa_02_Fotor.jpg

ARRI LMB 4x5 Matte Box

From a single-filter configuration for gimbals, drones, or Steadicams to clamp-on versions up to rod-mounted solutions, the LMB 4x5 makes short work of challenging situations. 

 

Bright Tangerine Misfit Matte Box

Bright Tangerine Misfit 3-Stage Carbon Fiber Matte Box

Carbon Fiber Top Flag w/ Wings

15mm LWS Rod Support

Clamp-on Options: 80, 87, 95, 110, 114, 136, 143mm

Donut for 138mm Diopters (must be rod mounted)

Pelican Case

 

 
1466622322000_1232546.jpg

OConnor 2575D Tripod System

The Ultimate 2575D Head & Cine HD Mitchell Top Plate Tripod System from OConnor includes the Ultimate 2575D fluid head package, Cine HD single-stage tripod system with Mitchell top plate, and a floor spreader. The fluid head is capable of supporting camera payloads up to 133 lb at a 4" center of gravity above the platform, and it offers a ±90° tilt range.

 
Oconnor-Ultimate-1030D-Tripod-System-1.jpg

OConnor 1030DS Tripod System

The Ultimate 1030Ds Fluid Head & 30L Tripod System from OConnor is a package comprising of the Ultimate 1030D fluid head, 30L carbon fiber tripod, mid-level spreader, set of rubber feet, and hard shell case. The fluid head supports up to 41 lb at 6" center of gravity with a ±60° tilt range. Without the head attached, the carbon fiber tripod adjusts from 22 to 61.8" and folds down to 29.5" for storage and transport. The tripod on its own can support payloads up to 209 lb. The mid-level spreader and rubber feet holds the tripod legs in position, providing rigidity and stability to the overall system.

 

 
EasyrigVario5FlowcineSerene.jpg

Easyrig Vario 5 w/ 5” Extended Arm + FlowCine Serene Arm

The Easyrig Vario 5 with Gimbal Rig Vest and 5" Extended Arm is a body-worn support system that is adjustable to support camera rigs weighing 11 to 38 lb. The system works by using a suspension line to support the weight of the gimbal rig, taking the load off of your shoulder, neck, and arm muscles, and distributing it across your torso. The tension line is adjustable by turning a screw in the back, letting you dial in the appropriate amount of tension for your rig. The system consists of the gimbal rig vest, Vario 5 standard support bar, and a 5" extended support arm. 


The FLOWCINE Serene is a two-axis spring arm stabilizer that attaches at the end of the Easyrig (2/2.5/3/Vario 5) arm. It smooths video results by mitigating vertical vibrations induced by walking or running during a tracking shot. It also stabilizes side to side motion in similar tracking situations by counter-pivoting around its center axis. The Serene also allows for full use of the Easyrig spring extension for going from high to low mode.

 

 

Filtration

You name it, we've got it!